Caution:

Before installing and operating the machine, please read and follow this manual carefully. Failure to adhere to the instructions may result in damage to persons and/or property. The system must be operated only with equipment and spare parts supplied or listed in the spare parts and consumables lists. Any auxiliary equipment must be properly adjusted to the base machine. For any queries, please contact your dealer or the manufacturer.

It is crucial that the installation of each system meets the specified requirements and aligns with the installation guidelines of AEON Laser. Failure to follow these instructions may result in improper machine operation, poor performance, reduced lifespan, increased maintenance costs, and potential machine damage. This note is intended to emphasize the importance of following the specific installation requirements. We urge every customer to understand these guidelines before installation and use. If you encounter any installation issues, please contact our technical staff or customer service team.

Intended use of the machine

The AEON laser system is designed for engraving and cutting signs, engraving stamps, and similar

applications. It can process a wide variety of materials, including rubber, acrylic, coated metal, tin,

special steel, anodized aluminum, cork, cardboard, glass, leather, marble, several plastics, and wood.

• The engraving process must only be performed with a perfectly adjusted machine.
• For cutting applications, using the blade cutting table is necessary.
• Use of the system in areas other than cutting or engraving is against its designated purpose. The manufacturer does not assume liability for damage to persons and/or equipment resulting from such use.
• The system must only be operated, maintained, and repaired by personnel who are familiar with its designated use and the associated dangers.
• Non-observance of the instructions for operation, maintenance, and repair described in this operation Manual excludes any liability of the manufacturer if a defect occurs.
• Caution is required when processing conductive materials (carbon fibers). Conductive dust or particles in the ambient air might damage electrical components and lead to short circuits. Bear in mind that such defects are not covered by warranty.

Disposal of the machine

Do not dispose of the machine with domestic waste!

Electronic devices have to be disposed of according to the regional directives on electronic and electric waste disposal. In case of further questions, please ask your supplier. He might take care of proper disposal.

Join Aeon Family

You can also subscribe to our YouTube channel here: AEON Laser Official（YouTube）for video tutorials and instructions. Join our Facebook community: AEON Laser Global（Facebook）to connect with other owners and get inspirational ideas on how to maximize your machine's use.

AEON Laser warmly welcomes your valuable comments and suggestions, and we will greatly appreciate!